Добрий день,

В процесі користування сервісом, виникла потреба порівнювати споживання електроенергії по двом календарним дням - "сьогодні" та "вчора", з можливістю відображення накладених графіків один на одного в режимі онлайн. Бачити споживання за попередній день тієї ж години гістаграмою, наприклад сірого кольору на фоні миттєвого споживання - більш яскравим кольором.
Чи можливо впровадити таку функцію у дашборді?

Hello, I have a digital kwh meter with S0 pulse output. The datasheet of the device indicates that the pulse length is 90ms. Can the pulse filters be set as follows?
At the start [ms]:0
At the end [ms]:90

Otherwise, what do you recommend?

When I create virtual values ​​in the Virtual section, I cannot then create other virtual values ​​that derive from arithmetic operations or functions between the previously created virtual values. In the right section I only see the device values.

I also tried in the dashboard but I have the same result.

Do you have other solutions to combine multiple virtual values ​​in arithmetic operations or complex functions?

D105 G4
Device ID:1778384966

I have two smart maic devices. For some reason whey I try to create a virtual value, there is no possibility to pick the device I need and all the values can be created only for the first device. The question is how to create a virtual values for the second device.

Hello,

I need to create a graph with the total power for each day, but i need to be able to filter by power absorbed in period.

For example, I have a load that consumes 3KW in standby and >10KW when working.

I would like a total of the kW consumed in the periods below 5kw and one above.

Is it possible to do this with the dashboard tools?

Thank a lot!!

Massimo.