- Загальний
- Дашбоард и виджеты
-
Питання
0
Є відповідь
axis scale
How can I change the scale of the axis? For example, I measure a Voltage of 5 Volts. Until 2 days ago, the right axis had (automatically) a maximum range of 5. Since yestrday, the maximum value of the axis is 50 Volt, therefore the height of my voltage-line is only 10 percent of the height of the screen. Thank you and best regards Kurt Böhm
Служба підтримки клієнтів працює на UserEcho
The axis scale is automatically selected based on the maximum value.
In your case, both values [ADC] and [T1] are bounded to the right axis.
The temperature value was 48°С, so the maximum value for the axis became 50.
In the widget settings, change the binding, for example, the [ADC] values on the left axis, and the [T1] values on the right axis.
Tip: if you want the zero value to always be displayed on the chart, set the Margin bottom indent to 0 in the widget settings.