- Общий
- Общие вопросы
-
Идеи
0
Запланировано
Экспорт импорт данных
Думаю не повредит, поскольку есть экспорт, сделать и импорт данных .
Или хотя бы возможность редактировать даты на вкладке "Данные"
С уважением
Сервис поддержки клиентов работает на платформе UserEcho
Добрый день.
Импорт или удаление данных и редактирование даты действительно бывает нужен.
Сделаем.
Hello.
I installed a new device. I did some tests, and the pulsemeter registered in the database.
How can I edit the values stored in the database? I want "pulsecounter" to be equal to "total pulsecounter".
The "Save to DB" button is disabled.
Thank you.
Hello.
See the manual and article in Knowledge base:
https://support.smart-maic.com/en/knowledge-bases/2/articles/154-d105-connecting-the-meters-with-a-impulse-outputYou do not need to edit the data.
Go to the WEB settings of the device, Current data menu
Set the value of your counter to the cumulative data TCh1 or TCh2
Note that m3 must be converted into impulses.
Hello.
Thanks for the reply. I already did this, I corrected the index to "current data".
But in the dashboard on the clud, only "total pulse 1" was updated, now being 13, but "pulse 1" remained at 88 pulses, which is not in accordance with the water meter
I have already converted the pulses from the 2 water meters into m3, even if they have a different number of pulses per m3, I used the logical functions provided. The software is very well developed.
If I can't edit it myself, please change "pulse 1" from 88 to 13 in my database.
You already did it yourself.
Reload the Dashboard and check again.
TCh1 - 13
TCh2- 27