1. Общий
  2. Оборудование
  3. Вопросы
0
Отвечен

D105 Water meter cunter

NCE 1 год назад в Оборудование • обновлен 1 год назад • 1

I have three D105 and three Caleffi 7942 water meters with pulse output (dry contact). I can't get the pulses to match the meter reading. The water meter makes 1 pulse for 10 liters. I have tried different settings for the pulse filter (0,1,5 ms). None of these settings brings the right result. What do I have to do?

Thanks

Отвечен
Support Manager 1 год назад

There are no impulses at all, more or less?

See the Knowledge base:

https://support.smart-maic.com/en/knowledge-bases/2/articles/154-d105-connecting-the-meters-with-a-impulse-output

You can leave the filter at 5-10ms for now.

But check the impulses visually, with the help of an LED.

Image 1766

1. Set the value of your water meter in the Current Data menu in the device WEB settings.
For example, the value must be in pulses, 5.841 m3 is [TCh1] = 584 imp.
2. Open the water and count 5 LED flashes.
3. Check that [TCh1] has increased by 5. (584 + 5 = 589 imp)

Сервис поддержки клиентов работает на платформе UserEcho